TUBULAR / INVERTER BATTERY

 

 

INVERTER RANGE

The inverter series is designed for frequent cyclic charge and discharge applications under extreme environments. By combining the newly developed nano electrolyte with high density paste, the deep cycle range offers high recharge efficiency at very low charge current. The acid stratification is highly reduced by adding Nano electrolyte. This series is suited for energy storage for use in inverter and renewable energies such as PV, wind turbine power systems and CATV.

FEATURES

  • More than 6 years float life at 20°C
  • Longer life design at renewable energy applications according to IEC61427
  • Wide operating temperature range from -15°C to 60°C
  • Nano electrolyte eliminate the acid stratification and prolong cycle life
  • Round trip efficiency as high as 85%.
  • Low self-discharge rate and long shelf life.)
  • Excellent deep discharge recovery capability.
  • Thick positive flat plate design with high Tin low Calcium alloy and high density paste

HOW TO MAINTAIN

  • Keep the battery top and surroundings clean and dry.
  • Keep all the electrical connection tight. Check for undue heating up.
  • During idle periods, freshening charge at normal rate must be given once in a month atleast.
  • While using spanners etc., care should be taken not to short circuit the battery.
  • Keep the vent plugs clean and tightly positioned.

TUBULAR RANGE

 

 

ADVANTAGE

  • High quality paste mix for negative plates.
  • More than 95% adherence to PAM vs NAM ratio
  • 99.99% filled weight consistency.
  • Longer life in high power cut situation

FEATURES

  • 100% design capacity.
  • Higher Capacity and better deep cycle performance.
  • Fast charging and easy recovery from deep discharge.
  • Special additive for better charge acceptance and retention of charge.
  • Highly resistant to extreme environmental conditions.
  • Batteries made on State-of-the-art, Advanced machineries.
  • Spine casting done on automatic pressure die casting machines.
  • Separate drying ovens for uniform and complete drying of plates.
  • High impact polypropylene cases for better durability.


HOW TO MAINTAIN YOUR BATTERY (DOS AND DON’TS) DOS

  • Keep the battery top and surroundings clean and dry.
  • Keep all the electrical connection tight. Check for undue heating up.
  • During idle periods, freshening charge at normal rate must be given once in a month atleast.
  • While using spanners etc., care should be taken not to short circuit the battery.
  • Keep the vent plugs clean and tightly positioned.